1·Study showed that angle deformation of T joint is changed along the welded seam length.
研究表明，T形接头的角变形沿焊缝长度方向是变化的。
2·This welded seam is found an obvious air hole and an unqualified undercut with macroscopic check.
这个焊口以宏观检查发现明显的气孔和超长的咬边。
3·But high energy beam welding makes the welded seam become braze-welding when adding fill material.
但加填充材料对铍进行高能束焊接可使焊缝形成钎接焊。
4·Must be Identified with the Tank that it belong, included the Slop Tanks, in proper manner, like welded seam or similar.
所有的人孔盖上必须用电焊或者类似方式做好舱名标识。
5·The experiments show that the welded seam is good and the metallurgical joint was achieved without melting the shell body.
试验表明，焊缝成型良好，在弹体不发生熔化的前提下实现了冶金结合。
6·In order to retain ample strength at the welded seam, the tube wall thickness is increased making the overall frame heavier.
为了保留足够的实力在焊接缝，管壁厚度增加，使整体帧重。
7·How to increase the welded seam impacting toughness of ERW pipe is a great problem among the technology of pipe manufacture.
如何提高erw钢管焊缝冲击韧性是制管技术中的一大难题。
8·In this paper, the influence of the draw rib setting on the welded seam movement for the tailor-welded blanks (TWBs) was analyzed.
分析了拉深筋的设置对激光拼焊板成型时焊缝移动的影响。
9·The reasonable widths of backup strip are experimented with the strength factor of the welded seam for a particular kind of PVC/PES.
PES背贴焊接缝合试验，得到了应力-应变曲线、背贴条宽度、焊接缝合强度系数；
10·Introduce welded seam specification, standards performed, inspectation items and acceptable index for welding of body and joint pipe.
介绍了阀体与接管焊接的焊缝技术要求、执行标准、检验内容及合格指标。
1·Study showed that angle deformation of T joint is changed along the welded seam length.
研究表明，T形接头的角变形沿焊缝长度方向是变化的。
2·This article explained the correct application of the theory of strength through using the commonly used bevelled halving welded seam as an example.
以工程中常用的斜对接焊缝的研究为例，说明了力学强度理论的正确应用方法。
3·How to increase the welded seam impacting toughness of ERW pipe is a great problem among the technology of pipe manufacture.
如何提高erw钢管焊缝冲击韧性是制管技术中的一大难题。
4·The technology of intelligent flaw detection is adopted in the system, realizes the inspections of high accurate welded seam automatic tracking.
采用智能化探伤技术，实现了高精度、快速焊缝自动跟踪的检测。
5·It puts forward welded seam automatic tracking system based on DSP vision sensor and presents the system main hardware block and software design briefly.
提出一种基于DSP(数字信号处理器)的视觉传感器焊缝自动跟踪系统，并对系统主要硬件模块及软件设计做了简要介绍。